Home of ProSTAR

Bogie turntables or Wheelset turntables come in different outer diameters and are comprised of a main steel structure, a central support for rotation and lateral wheels to support loads. They are either manually operated or motorized.  Wheelsets rotating table for tramway or train have load capacities from 2.5Ton to 6Ton and the Bogie rotating table has capacities of  6Ton to 10-15ton

                            Bogie/Wheelset Drop Systems

There are three different types of Bogie Drop Systems.

The first is a a big pit or underfloor tunnel and machine that has a scissor lifting device or a screw lifting system

The second is a medium pit and machine that contains a screw lifting system.

The last has no pit but has a screw lifting system . 

Depending on the type of train only two supports are need for the coach. The movable frame for the “no pit” type is a steel frame with four lifting points and four Steel Wheels that can be removed laterally.  The length of the frame allows the person operating the system to remove the modules that are fixed under the coach of the train using a special interface.

Home of ProSTAR

Dummy Bogie – Equipped With Car Lifting Device and Motorized:

Auxiliary/Dummy Bogies with a capacity from 10 to 25 Tons are composed of a main steel structure with a central supporting bar for the train car and four wheels. They can be either manually operated or motorized, while the support bar can be either adjusted or in a fixed position. If required the bogie can turn or remain fixed in accordance with the clients requirements.

This is the newest member in our stable of electric hoists.

This hoist features an advanced brake system with lifting overload safety devices.

High performance, low noise cooling fan with a speed ratio 4:1 which increases the efficiency.

48v control voltage for operator safety, It has f class insulation motor with thermal protection.

The load chain is suitable for application in harsh operating environments with aluminum alloy casting.

The LNR Series has the added feature of being designed for buildings with low ceilings and includes a range of Ultra low Head Room.

The limit switch is sensitive and will turn off automatically, if excessive vibrations occur during hoisting, to ensure operating safety.

PST-CBT Extra low headroom trolley

Used for extra-low ceiling and limited headroom

PSTP-L Low headroom push trolley

Used for low ceiling and limited headroom

Easily adjustable to fit a wide range of beam widths

Anti-drop stops as standard

PSTG-L Low headroom gear trolley

Used for low ceiling and limited headroom

Easily adjustable to fit a wide range of beam widths

Anti-drop stops as standard

PSHTP-MK Twin pin type push trolley

PSTG-MK Twin pin type geared trolley

Twin pins type

High quality and strongly construction

Forged steel wheels 

High-grade, fully sealed bearings for maintenance free extended life

Anti Drop plates as standard for improved safety and compliance

PSTP-FK Screw load bar push trolley

Easy to adjust to the actual beam by means of the right and left threaded suspension bolt 

The wheels are made to fit vauious beam profiles

High grade sealed, maintenance-free, ball bearings 

Anti-drop stops as standard

PSTP-DK Push trolley

Single pin, both push and geared trolleys to suit a range of beam widths. 

High quality construction

Forged steel wheels 

High-grade, fully sealed bearings for maintenance free extended life

Anti Drop stops as standard for improved safety and compliance

This traditional bogie has two sets of wheels with axles via a front pair of wheels and a rear of wheels for enabling running of the wagon on rails. The wheels are immovably fitted the axle, which turns together while running and are held in position by the H frame at the end of the axles through boxes. It is the H frame which plays a major part for the ultimate behaviour of the bogie.

PSSP-EL1Clamp

For use in limited space above the beam 

Has lifting points each side and can be used independently or together for a balanced lift

PHSP-EL2 Clamp

For use in limited space above the beam 

Has lifting points each side and can be used independently or together for a balanced lift.

PSSP-B Clamp

The left and rignt hand threaded adjusting bar only requires turning so as to ensure appropriate adaptation to a beam width, and the trolley is ready for use

No additional tools or width adjusting components are required

PSSP-BA Clamp

The left and right hand threaded adjusting bar only requires turning so as to ensure appropriate adaptation to a beam width, and the trolley is ready for use

No additional tools or width adjusting components are required

PSSP-A Clamp

A self locking unit with wheel guarding anti-drop plates designed for maximum speed of application, minimum maintenance requirements and maximum safety

PSSP-S Fixed Jaw Clamp

These clamps are truly versatile in application and may be used for lifting, pulling, or as an anchor point 

Designed specifically to provide maximum jaw grip adjustment

PSSP-S Swivel Jaw Clamp

Swivel jaw adjustable girder clamps imcorporate the additional benefit of horizontal jaw adjustment

This enables the full length and a maximum width of the swivel jaw to anchor evenly on a considerable surface area of the beam flange

Home of ProSTAR

Locomotive Turntables 

We are able to supply different machines in accordance with specifications set out by the client. With a starting load capacity of 60Ton to 250Ton, which includes a bridge length from 20 meters to 30 meters or more, the machine can be installed with a pit or without one. It can also be either fully automated or semi automatic depending on the requirements of the client.

Traversers

As with the Locomotive Turntables the Traverser are supplied is accordance with the unique requirements of the client with a starting load capacity of 60Ton to 250Ton and a bridge length from 20 meters. It can be installed with or without a Pit and can be either fully automated or semi automatic in keeping with the clients specification.

ProSTAR Electric Chain Hoists

Construction and Feature

Capacity range : 500kg – 30 Tons

Power supply:

220-600v 50/60hZ 3PH, 500kGs – 2Tons

220v-230v 50/60hZ, 1PH

advanced Brake Systems

Super High Load Chain

Integral Hermetic structure

safety Protection Devices

Ultra Short design

Mechanical brake system with overload protection device patented in Taiwan, china, USA and Germany.

ProSTAR motors are made with Aluminum Alloy material with light weight, with excellent thermal diffusion. The gear is manufactured using a steel alloy material, using a quenching and grinding procedure which results in low noise during operation. A buffer has been designed to enhance the motors life. The IP54 rated motor come with a high starting torque, excellent thermal diffusion, compact,  low current, reliability and durability.By incorporating a direct electro-magnetic brake so that the driving force of the motor can be easily adjusted.